Total Weight:
57.5 lbs (26.08 kg)
Battery Weight:
7.5 lbs (3.4 kg)
Frame Material:
6061 Aluminum Alloy
Frame Sizes:
17.5 in (44.45 cm)19 in (48.26 cm)Geometry Measurements:
Small/ Medium 17.5", Medium/ Large 19" (19" Seat Tube, 23.25" Top Tube, 27" Stand Over Height, 71" Wheel Base)
Frame Types:
Step-Thru
Frame Colors:
Gloss White with Taupe, Gloss Gray with Taupe
Frame Fork Details:
SR Suntour XCT with 80 mm Travel, Preload and Lockout, 9 mm Skewer with Quick Release
Frame Rear Details:
9 mm Axle with Bolts
Attachment Points:
Fender Bosses, Bottle Cage Bosses
Gearing Details:
10
Speed 1x10 SRAM X5, PowerGlide™ 1070 11-36T CassetteShifter Details:
SRAM X5 on Right Handle Bar
Cranks:
Samox Aluminum Alloy, 186 Q-Factor, MTB Sealed Cartridge BB,ISIS Spindle, 42T
Pedals:
Wellgo Aluminum Alloy Platform with Rubber Tread
Headset:
Samox Integrated 1-1/8"
Stem:
Promax Tool-Free Adjustable Angle and Rotation
Handlebar:
Zoom Aluminum Alloy, Low-Rise, 580 mm Wide, 15° Backsweep
Brake Details:
Tektro Auriga Hydraulic Disc with 160 mm Rotors, Tektro Levers
Grips:
Rubber Ergonomic, Locking
Saddle:
Selle Royal Free Way
Seat Post:
Promax, 6061 Aluminum Alloy
Seat Post Length:
300 mm
Seat Post Diameter:
30.4 mm
Rims:
Single Wall Aluminum Alloy
Spokes:
Stainless Steel, 14G Front and 13G Rear, Silver
Tire Brand:
Kenda Kranium, 26" x 2.1"
Wheel Sizes:
26 in (66.04cm)Tire Details:
40-65 PSI
Tube Details:
Schrader Valve
Accessories:
Plastic Fenders, Plastic Chain Guard with Reflective Side, USB Charging Port at Top of Battery, Spanninga Integrated LED Lights
Other:
Waterproof Grade IP65 Display Panel, Locking Removable Battery Pack, 1.8 lb 2 Amp Charger
George J
8 years agoTheir website states DD motor but EBR reports geared. I’m assuming it’s geared. Emailed the company 3 x but no response. Strange…..
ReplyCourt Rye
8 years agoHi George, they emailed me and said it’s direct drive but that’s strange to me… it really seemed like an internally geared hub due to the noise made when I test rode it and the design is compact vs. large as with most other gearless. The weight of the bike is heavier though… so maybe this is just a very compact gearless. If I had to guess based on all of the other electric bicycles I’ve tested over the years, I’d say it’s geared.
ReplyGeorge J
8 years agoCourt, thanks for the fast reply. I emailed them 3 x but no reply. It looks like a geared motor to me. If it’s DD, too bad it’s not equipped with regenerative braking.
ReplyCourt Rye
8 years agoRight, sorry to hear they haven’t gotten back to you! Busy time of the year however, I can say that my experience working with them has been good and that I feel like they offer a good product overall. Good luck with whatever you choose :)
ReplyRon T
8 years agoI purchased the white 17.5″ Rook online. It was easy to assemble. There is an assembly video on the Surface604 website. It is an excellent commuter ebike, solidly built with upgraded components throughout. The Battery Watt Hours is 499.2 wh, not 374.4 wh.
Let me address the EBR Cons.
If you are looking for a step-thru commuter ebike, I think this is the one to consider buying.
ReplyCourt Rye
8 years agoWell said Ron! Glad to hear you’re enjoying the Surface 604 Rook, thanks for taking the time to address some of my “cons” and share your experience so far :)
ReplyGeorge J
8 years agoRon, is the motor direct drive or geared? Their website states direct drive but it looks like a geared motor. I emailed the company three times but they never responded. Thanks.
ReplyRon T
8 years agoGeorge, the hub motor is geared, 500w, 48v.
ReplyCourt Rye
8 years agoAwesome, thanks for confirming this Ron!
ReplyGeorge J
8 years agoI called the company directly, the motor is direct drive but no regen is offered.
ReplyCourt Rye
8 years agoThe company also reached out to me saying it’s direct drive but I’m not sure I believe it based on what I saw in person and now again in videos. It just doesn’t look like direct drive… it’s small, makes more of a whirring noise and is zippy. Most direct drive motors are large and quiet.
ReplyRon T
8 years agoThe Rook owner’s manual from the Surface604 website states that the hub motor is a “Geared Motor”.
MOTOR SPECS
SPECIFICATIONS
- Core Data Position: Rear Motor
- Construction: Geared Motor
- Nominal Voltage: 48V
- Power: 500 W
- RPM: 315-240
- Torque: 60-80 Nm
- Efficiency: ≥80
ReplyCourt Rye
8 years agoWow Ron… you are AWESOME, thanks for taking the time to confirm this. I’ve been caught between the company saying one thing, my own gut feeling and observations and people asking about it. I sincerely appreciate you taking the time to share this :)
ReplyKarl
8 years agoI bought both the Colt and the Rook. I did have some shipping damage but Sam from Surface 604 worked with me and got all the parts to me no problem and gave me a few bucks back to do the repairs. I have The original EV Global electric bike with a 36V 500watt geared hub motor. It’s too bad they did not have a better battery when they came out with them. This bike was way before its time for sure. headlights, tail lights, brake lights, cruise control… Just no good battery.
I had a lipo battery made and rode it for yrs but the Surface 604 Colt and the Rook are night and day. I have been watching your reviews for a few years and when you reviewed this one I called the company the same day because of the upgraded components and the look of the bikes. I bought both bikes for my wife and I and at 62yrs old and 58. She has not ridden since she was a teen and she loves the help from the peddle assist. I find the brakes are great and there is plenty of adjustment on the seat post and handle bars and like most things you need to tighten things up so they do not move or shift.
I find after looking at and watching reviews for years, this is by far one of the best values for a street cruiser or packed trail bike. I would tell a friend to check these bikes out for sure. Court keep up the good reviews, you do a great job reviewing and promoting electric bikes. Thanks
ReplyKarl
Court Rye
8 years agoWell, thanks Karl! I enjoyed reading your thoughts, so glad you and your wife can get outside and enjoy riding around together. It was neat hearing about the older EV Global ebike as well, I got to see and test ride one a while back and they certainly were ahead of their time :)
ReplyRobert
8 years agoThese bikes are no longer shipping with the no-tool adjustable stem. The new stem is adjustable in the same manner, but requires a hex key to adjust. Surface 604 states that this is due to safety concerns. As of now, the website has yet to accurately reflect this.
ReplyCourt Rye
8 years agoThanks for the update Robert! I’m going to leave the specs and details in my review as they are (to reflect the product I saw in person) but your feedback will certainly help those who are receiving the new model and hopefully Surface 604 will update their own site soon :)
ReplyRobert
8 years agoThanks, Court, for your many excellent reviews. I received my Rook yesterday and am loving it. But there’s a genuine issue with the torque sensor, which appears to do absolutely nothing at all. Makes me wonder whether it’s simply completely defective. Regardless of assist level, as soon as you even TOUCH the pedals (and certainly regardless of applied torque), the motor kicks in at full blast until the max speed (set by assist level) is achieved.
Put simply, there is ZERO torque sensitivity. This isn’t an insurmountable problem, but I sure would love the ability to attempt to adjust the torque sensor’s sensitivity. Surface 604 reported back to me that there is no option for adjustment. I find this a little surprising given that the Bafang controller has plenty of additional (if nearly impossible to decipher) settings locked out via the password screen (the factory password seems to be 0512). Documentation on the controller is next to impossible to find, which makes investigating this more difficult.
BTW, I got excited when I found the max speed limit setting hidden beyond the password screen. I promptly cranked the max all the way up to 38 mph and did a little dance of excitement. But alas, the setting had no effect whatsoever. Looks like I’m stuck with the legal ‘not-a-moped’ limit of 20mph, which appears to be hardwired into the motor itself.
ReplyCourt Rye
8 years agoHmm, sounds like your experience has been a little disappointing Robert, sorry about that. I’m glad you were able to reach Surface 604 and get a response but I have no idea if maybe the performance is off or if your settings of high speed made the controller more sensitive or what. The bikes I tested were all professionally setup which is one of the drawbacks to my “reviews”. It’s more of an overview… I hope your purchase works out and appreciate you sharing here in case others have similar experiences :/
ReplyHoppy
8 years agoRobert, you may have a defective torque sensor. I received the Rook this week and the torque sensor is working fine. It limits the speed at each of the 5 levels when pedaling. Also, the throttle speed is limited at each level. Call Sam at Surface 604 and he probably can send you a new sensor.
ReplyDan
7 years agoRobert – I had something of the opposite experience testing riding a Rook today. Rather than the torque sensor defaulting to full on with the slightest pedaling, in my case the engine came on intermittantly and unpredictably. It cycled on and off without delivering steady power. Without using the throttle, the bike was basically useless as an ebike with PAS. I so much wanted to like this bike, but we (my wife was the customer) bought an EVO ECO instead. It road much more predictably; the throttle function was only available on the “0” setting, but at least it was steady as was the PAS. It would appear that Surface needs to work on the the sensor/controller or what otherwise seems to be a fine product will scare away customers needlessly as they did with us…
ReplyKen Sobel
8 years agoMy wife is 5’1″ tall with a 29″ standover height and weighs 120 pounds. Does anyone know if this bike would be appropriate for someone that size? If you have any experience with these measurements on this model, please let me know. We’re in our early 70’s and both want this bike.
ReplyCourt Rye
8 years agoHi Ken! I measured the bike during my ride and found that the stand over height of the frame is just 27 inches. I measure just in front of the nose of the saddle so it’s more realistic than the true bottom of the step-thru area… but keep in mind she would still have to hop up onto the saddle which is several inches above the base of the seat tube. I like this ebike a lot but a good alternative for shorter riders is the Pedego 24″ cruiser which has smaller wheels that bring the entire frame down. I hope this helps you both and you have fun riding! If you can, go into a local shop for test rides :)
ReplyKen Sobel
8 years agoCourt, I thank you for your reply to my questions about the Surface 604 Rook for my wife. However, the Pedago 24″ is just too expensive for me. I’ll take a closer look at folding bikes. I’m thinking of the Magnum. The owner of the company said that his wife is 5’1″ and it works just fine for her.
In the future, would you consider adding something to indicate appropriate sizes when evaluating bikes?
ReplyCourt Rye
8 years agoSounds good Ken! Pedego offers a similar frame that’s less expensive called the 24″ Classic Cruiser, I accidentally linked you to the 24″ Interceptor. In any case, there are lots of great folding ebikes and Magnum makes a good product. I record the stand over height for all of the ebikes I review but that doesn’t always paint the full picture if the seat tube is long and the saddle can’t come down. I’ll do my best to be clear and wish you and your wife luck!
ReplySteve Newman
7 years agoCourt, I am considering either the Rook or Colt. In a quick summary, how would you contrast the two. My application (at 70 years old) would be easy/comfortable cruising. Do both bikes have a thumb throttle? If so, is it on the right or left? I am a ATV rider and am accustomed to a right thumb throttle. If it is on the left, can it be moved to the right? Also, I could not find a specific reference indication that the bike can be powered in a throttle only mode without peddling. Thanks in advance for your response. I find your review very insightful.
ReplyCourt Rye
7 years agoHi Steve! I like how the Rook has a lower step frame design because my knee is sensitive and some people have told me that it helps them with sensitive hip or back. In short, the bikes use the same motor, battery, control system etc. it’s basically the same thing but with a different frame (diamond or step-thru) and I believe they come in two color choices so you could get white or black.
The throttle was setup as a trigger on the left side but I do think it could be moved to the right, though it might be flipped then and push up vs. down in that case. Maybe there’s enough wire to flip it? Indeed, these electric bikes can be powered by the throttle only and it works great. It’s one of the best features for someone like me with a sensitive knee. I show this in action in the video above and you can actually see the throttle if you navigate four to the right using the photo album at the top. I hope this helps, Surface 604 is also a responsive company that should reply pretty quickly if you wanted to reach out with any more questions or clarifications :)
ReplyRichard Dow
7 years agoCourt, your reviews are my go-to’s ever since I’ve been trying to become more mobility independent following a stroke. I really love the RAD Power Bikes and was all set to pull the trigger on a RADCity until I realized through one of your follower’s comments that my 30″ inseam (even though I am 5′ 10″) would not clear the stand-over height even on the smaller frame! Then I looked into the scooter style, which I really like due to its step through construction, large headlight, turn signals, and rear view mirrors. But I’m concerned with weight and overnight parking, and the fact that I could not inconspicuously ride on the sidewalks here as I could with a bicycle (even though very few pedestrians use them). I looked at the American Electric scooter that you reviewed a few years ago because they are headquartered here in Florida. Now, I’m considering – again mentioned by one of your readers and followed up by your review – the Surface 406 Colt and Rook. Although they are more expensive than the RADs, they seem to have some really high end equipment. While I would prefer the Colt, the Rook, even though I associate it as an old guy with a girls bike, is probably the most practical since I have some paralysis in my right leg. It seems otherwise identical in features. Comments would be appreciated. Keep up the great work!
ReplyCourt Rye
7 years agoHi Richard! I think you’re on the right path here… The Rook would be my choice personally, especially as my knee degrades a bit (it has sensitivity and my hip can also hurt due to some old skiing injuries). Surface 604 now offers this step-thru model in black which is going to be less visible than white but much more masculine. I feel that the company offers great customer support and that even though you’re paying a bit more for it, you’re also getting some nice hardware upgrades and it could be worth it. You care correct that the Colt and Rook are identical in terms of drivetrain, motor, battery etc. just the frame is unique. I hope this helps!
ReplyRichard Dow
7 years agoThanks for the reply! It does indeed help my decision. Also, I have found a dealer who is not very far north of me. Hopefully I can get up there soon to actually try to bike. The new black color is great, although I thought the gray was pretty nice too. Besides the color, I read that the handlebars now require a tool to adjust. This is not a problem for me – I think the other was a feature more aimed at rentals. Are there any other significant changes since your review that I should know about? Thanks again for your reviews; they have contributed mightily to my search!
Richard Dow
7 years agoHi Court. Well I made my decision and put a deposit on a black Rook. I won’t get it until mid-November because apparently there has been such a surge of interest in these bikes the company hasn’t caught up with the demand! I found a dealer not too far from me – about an hour and a half north – who is willing to deliver it to me fully set up. They are located at Daytona Beach and do a big business in rentals for tourists who want to ride on that world-famous beach (maybe that would be a good site for your 2018 update!). Thanks for your excellent reviews and you’re answers to my questions which helped me make the decision.
ReplyCourt Rye
7 years agoThat’s fantastic Richard! Awesome that the dealer will even deliver it to you. Good suggestion about hitting Daytona Beach, I don’t think I have reviewed anything there yet, so glad you enjoyed my work and found value. I hope you really enjoy the new black Rook when it arrives :)
ReplyMichele D
7 years agoHey. Loving the site and all your reviews! It has been very helpful in my search for the perfect ebike for my needs. My only ebike experience has been a rental in Whistler where I rode the Biktrix Stunner. I liked the bike and it worked well for the day but I’d prefer one with front suspension. I found it a little jerky when I started pedaling, but I think I would get used to that over time. I like the upright position to ride, too.
I was wondering if you could give an opinion on the pros and cons of the Voltbike Elegant vs the Surface 604 Rook. Is the Rook worth the price difference if I desire the best quality for money? It looks like several components used are the same, so that is why I have the need to ask your (or others who may have experience) opinion. I was going to try Rad Power Bikes, but it sounds like their RadCity will be too tall for me and I don’t like the folding bikes. Are there any others near me that are worth checking out?
I am 5’4″ with a 29″ inseam. I will use the bike in the PNW on mostly rail trails (paved or packed gravel) and dirt trails like you will find around Whistler Villiage…not the hard core MT biking stuff…the ones around the lakes and village. I just want to be able to keep up with the hubby when riding all day and we prefer nature rides over urban ones. I am trying hard to find a place where I can test out these bikes but it is looking like a trip to BC is in order. Just wanted to get your input if I could. Thanks in advance!
ReplyCourt Rye
7 years agoHi Michele! Great question… The lower price of the Voltbike Elegant is tempting but you are trading durability and performance in my opinion. Surface 604 has a mountain biking background (the lead designer has been riding for a long time) so they use hardware that is more durable and water resistant. The frame and fork won’t flex as much, there might not be rust in the headset or bottom bracket, the drivetrain probably won’t need to be tuned up as frequently, the suspension will perform better. It’s great that Voltbike is making something affordable, but in order to get the cost that low, their hardware is specced down in pretty much every way they can. It’s not bad, just different. If you can afford to pay a bit more and want something more durable, I think the Rook or Colt would be great choices and are still offering excellent value.
ReplyMichele D
7 years agoHi Court,
Thank you so much for your quick reply. This was exactly the information I needed. Being in the PNW, your points are very helpful and just what I needed to know. Thanks again for this great site!
Safe riding :-)
Michele
Ed Omer
7 years agoWe bought both the Colt and the Rook in Feb. for traveling with our motor home this summer, nice sturdy bikes great to ride, could peddle all day without getting tired. I find on the colt that I am always in eighth gear or higher because in lower gear the bike moves faster than I want to peddle, as soon as I put presser on the peddles the bike takes off faster than I want to go. The dealer I bought the bikes from is not sure if he can tone down the sensitivity of the torque sensor. I have read that with the Bafang controllers a programming cable and the right software, the peddle assist can be tone down if you are careful and not mess with the wrong settings. Would this be a good way to go about fixing the problem ? I would like to be able to peddle a bit more and not just turn the peddles.
Replycourt
7 years agoHi Ed! I suspect that advanced shops with the proper tools (or maybe some of your own research) could adjust how responsive and sensitive the torque sensors are. In the meantime, perhaps you can just ride with a lower level of assist, have you been using level 1 or maybe higher? If you go with 1, the motor might not kick in as hard and you’ll be able to pedal more.=
ReplyEd Omer
7 years agoIts first and second that I have the problem with, you can’t move at a slower pace without shutting off the peddle assist and doing all the work yourself. If I can’t find a shop nearby that can do the work, I will look into the software and tools to do the work myself. Thanks Ed