Total Weight:
58 lbs (26.3 kg)
Battery Weight:
5.4 lbs (2.44 kg)
Motor Weight:
8.8 lbs (3.99 kg)
Frame Material:
Aluminum Alloy
Frame Sizes:
16.54 in (42.01 cm)18.50 in (46.99 cm)20.47 in (51.99 cm)22.44 in (56.99 cm)Geometry Measurements:
Medium 47 cm: 18.75" Seat Tube Length, 23" Reach, 17.5" Stand Over Height, 74" Length
Frame Types:
Step-Thru
Frame Colors:
Matte Silver, Matte Black
Frame Fork Details:
RockShox Air, 100 mm Travel, Lockout, Rebound Adjust, 100 / 9 mm Skewer with Quick Release
Frame Rear Details:
130 / 10 mm Threaded Axle with Nuts
Attachment Points:
Rear Rack Bosses, Fender Bosses
Gearing Details:
1
Speed 1×∞ NuVinci N380 CVT with Harmony Automatic Electronic Shifting (30 to 120 RPM), 18T CogShifter Details:
NuVinci Harmony Electronic Shifting, Bosch Intuvia Button Pad on Left, Automatic or Manual (Hold i Button)
Cranks:
Corratec, Alloy, 170 mm Length, 18T Chainring
Pedals:
Aluminum Alloy with Rubber Tread
Headset:
Tapered, 1-1/8" to 1-1/2"
Stem:
Alloy, Adjustable Angle 0° to 60°, 60 mm Length
Handlebar:
Zzyzx, Aluminum Alloy, Swept Back, 27.5" Length, 31.8 mm Diameter
Brake Details:
Magura MT5 Hydraulic Disc with Shimano 180 mm Front Rotor and 4 Piston Caliper, Shimano 160 mm Rear Rotor and 2 Piston Caliper, Magura MT4 Levers with Adjustable Reach
Grips:
SQlab, Ergonomic, Rubber, Locking
Saddle:
SQlab 621 with Airflow Pivot, Active Saddle Technology
Seat Post:
Post Modern Suspension with Shim
Seat Post Length:
350 mm
Seat Post Diameter:
30.9 mm
Rims:
Zzyzx, Aluminum Alloy, Double Wall, 36 Hole, Reinforcement Eyelets
Spokes:
Stainless Steel, 12G, Black with Silver Nipples
Tire Brand:
Continental Ride Tour, (54-584)
Wheel Sizes:
27.5 in (69.85cm)Tire Details:
Extra Puncture Belt, Reflective Sidewall Stripe, 65 PSI
Tube Details:
Presta Valve
Accessories:
Flick Bell on Right, Plastic Fenders (65 mm Width), Alloy Rack with Racktime Interface (55 lb / 25 kg Max Weight), Plastic Chain Cover, Integrated AXA Blueline30 LED Headlight (30 Lux), Integrated AXA Blueline LED Backlight, Pletscher Adjustable Rear-Mount Kickstand, Vibration Dampening Bar-End Weights, Clear Sticker Slap Guard
Other:
Locking Removable Battery Pack with LED Charge Level Indicator, 1.4 lb 4 Amp Charger, Fusion Tube Edge (Downtube Reinforcement), 350 lb Max Rider Weight
Mark
8 years agoHi Court, I always hear you say that the mid drives are limited by the assist cut off at a not-so-high cadence RPM, so you have to upshift if you want to go faster . Bosch has a more favorable feel since the cut off is 106 RPM so you can pedal fast enough if you want to. The assist cut off in Yamaha, Brose, and other popular OEM brands are in the 80-90+ RPM. However, things have recently changed and you should really check it with a cadence meter especially when you tested the recent Giant ebikes since they now use the new Syncdrive that has higher cadence cut off of 110-120 RPM.
This is from the E-mountainbike magazine here: ” The pedal-assist on the SyncDrive Pro works in the three strongest support modes with a cadence up to 120 rpm, and up to 110 rpm in the lower two modes. This is another diversion from the Yamaha PW-X, which only supports up to 120 rpm in the most powerful pedal-assist mode.”
So your preconceived notion on Mid drives does not apply anymore to this newer models. The newer Giant ebike has a cadence meter on it’s display panel so the more reason there is no excuse not to check it.
ReplyCourt Rye
8 years agoHi Mark, great feedback and data… I appreciate your link as well. The Bosch Performance Cruise and CX motors off offer drive support up to 120 RPM while the Active only reaches 100 RPM. I’ve noticed this drop while reviewing and tried to call it out but it still beats other drives which hover around the 80-90 as you mentioned. There are times when I’ve been sloppy and simply recited my experience with Yamaha or Shimano, generalizing, but I strive to always explain how the specific ebike I’m riding feels and performs. Part of my service here is being qualitative and heavy bikes, those with frame flex etc. are described as such. I described the nimble feel of recent Giant reviews that use SyncDrive branded Yamaha but still did not match Bosch in terms of RPM support. In short, I’ll try harder and be more thorough… I appreciate your feedback and welcome you to chime in anytime. Comments like yours add a lot of value here and I depend on them with my own limitations.
ReplyMark
8 years agoI know you love Bosch mid drive but please use cadence meter (standard feature in the Giant anyway) to determine the top end of the assist, to be more objective when comparing different mid drives.
On my 2015 Tekoa with ttranzX mid drive, it has a top end of 80 RPM at PAS 1 all the way to 100 RPM at PAS 4. I have to vigilantly watch the cadence meter or else I will lose my momentum if I outpedalled the top end.
Although I also have a cadence meter on my BBSHD, I don’t have to be vigilant since I cannot outpedal the motor with a rated 150 RPM.
In effect, since I am not limited by the top end in the BBSHD, it feels similar to a non powered bicycle (only faster). It also feels similar to my direct drive (Izip Dash) but with the climbing ability.
Mark
8 years agoHi again, I could be wrong since there are 3 varieties of the syncdrive and only one of them (Syncdrive Pro) has 120 max cadenc, the 2 other varieties only has 100 max cadence. The pro also has 5 assist levels while the rest only have 3 assist levels.
ReplyCourt Rye
8 years agoHi Mark, thanks for responding! I found this page as well after reading your last comment and am on the verge of publishing a review of the Dirt-E+ 1 with the updated info. I was able to get a lot of great footage for the video showing my cadence and maxing it out… then shifting up to the highest 2 or 3 gears to get 20 mph. It’s a great system, I don’t mean to be overly critical of one company or another, just describe the differences. I’m very excited to try the Pro model and yeah, I heard it has five levels of assist vs. just two :)
Reply