Total Weight:
71.5 lbs (32.43 kg)
Battery Weight:
8.7 lbs (3.94 kg)
Frame Material:
6061 Aluminum Alloy, Hydroformed
Frame Sizes:
19 in (48.26 cm)Geometry Measurements:
19" Seat Tube, 23.25" Reach, 28.5" Stand Over Height, 33.5" Minimum Saddle Height, 26.75" Width, 76.25" Length, 47" Wheelbase
Frame Types:
High-Step
Frame Colors:
Matt Black
Frame Fork Details:
RST Guide Coil Suspension, 80mm Travel, Compression Adjust with Lockout, Preload Adjust, 32mm Stanchions, 135mm Hub Spacing, 9mm Axle with Quick Release Skewer
Frame Rear Details:
175mm Hub Spacing, 12mm Threaded Slotted Axle, 18mm Nuts
Attachment Points:
Fender Bosses, Rear Rack Bosses, Bottle Cage Bosses
Gearing Details:
7
Speed 1x7 Shimano MF-TZ500-7 14-28 Tooth Freewheel, Shimano Altus DerailleurShifter Details:
Shimano Rapidfire Triggers on Right (One-Way High Lever, Three-Shift Low Lever)
Cranks:
Prowheel Pioneer Forged Aluminum Alloy, 170mm Length, 42 Tooth Steel Chainring with Aluminum Alloy Guide
Pedals:
Wellgo M228 Aluminum Alloy Platform, Open Style
Headset:
Threadless, Internal Cups, Straight 1-1/8"
Stem:
Zoom H1909C Adjustable Angle (0 to 60 Degrees), 80mm Length, 31.8mm Clamp Diameter, One 20mm Tapered Spacer, Two 10mm Spacers
Handlebar:
Aluminum Alloy, Low-Rise, 680mm Length, Black
Brake Details:
Tektro Aries Mechanical Disc with 180mm Rotors, Four-Finger Levers with Rubberized Edge, Integrated Bell, Motor Inhibitors
Grips:
Velo, Flat Rubber, Locking, Black
Saddle:
CHIFA, Hybrid, Black
Seat Post:
Promax, Aluminum Alloy, Single-Bolt Clamp
Seat Post Length:
350 mm
Seat Post Diameter:
27.2 mm
Rims:
Aluminum Alloy, Double Wall, 82mm Outer Width, 36 Hole, Black
Spokes:
Stainless Steel, 12 Gauge Front, Adjustable Nipples, Black
Tire Brand:
Kenda Krusade Sport, 26" x 4.0" (98-559)
Wheel Sizes:
26 in (66.04cm)Tire Details:
5 to 30 PSI, 0.4 to 2.1 BAR, 60 TPI Casing
Tube Details:
Schrader Valve
Accessories:
Custom iGO Rear Rack with Standard Gauge Pannier Hangers (25kg 55lb Max Weight), Plastic Fenders (105mm Width), BLAZE-LITE HL1900 Integrated Front Light (Single-Beam), BLAZE-LITE RL1900 Integrated Rear Light (1 LED), Tektro Bell, Rear-Mount Adjustable Kickstand
Other:
Locking Removable Semi-Integrated Downtube Battery Pack, Mediry 1.6lb 2 Amp Charger, Ergofit System Allows the Seat to Reach Lower Positions and the Stem and Handlebars to Adjust and Fit Riders from 5ft to 6ft 2in Comfortably, Internal Cable Routing, Twist Locking Weather-Resistant Connectors, 48 Volt 22 Amp 9 Mosfet Controller, 136kg (300lbs) Max Load, Rust Resistant KMC Z-Chain
Larry
5 years agoThe link to the video review seems to be missing??
ReplyCourt
5 years agoThank you so much, Larry! How odd, I’m not sure what happened but you were correct. The link was missing, so I’ve updated it and now it appears to be showing correctly on my end. Thanks!
ReplyTerry
5 years agoWill a pair of Ortlieb Back Roller Classic Bags fit on the default pannier with out rubbing against the tire?
ReplyCourt
5 years agoHi Terry! I searched around and saw some pictures of the Classic, and they looked similar to the Ortlieb Back Roller City which had different angles shown on Amazon. I see that there are two plastic hooks on the back for hanging, and a third in the middle to secure it to the bike. They all appear to be highly adjustable… so I do think that the lower one could be slid back to interface with the rack support strut. This is just a guess, but yes, I do think that it’s highly likely that not only will the bag fit, but it might even secure using the third hook. My experience with Ortlieb over the years has been good, so I hope yours is too! Thanks for the question, and please do chime in again if you end up buying these bags and using them successfully!
ReplyTerry
5 years agoI think the link to iGO Electric bike forums may need to be changed from /igo/ to /igo-electric/
ReplyCourt
5 years agoGreat catch! I’ve updated both, thank you so much Terry!
Reply