Total Weight:
53 lbs (24.04 kg)
Battery Weight:
6.5 lbs (2.94 kg)
Frame Material:
6061 Aluminum Alloy
Frame Sizes:
14.5 in (36.83 cm)Geometry Measurements:
14.5" Seat Tube, 24" Reach, 24" Stand Over Height, 64" Length
Frame Types:
Mid-Step, Folding
Frame Colors:
Microcrystalline Matte Black, Microcrystalline Matte White
Frame Fork Details:
Zoom Suspension, Lockout, Preload Adjust, 9 mm Quick Release Skewer
Frame Rear Details:
10 mm Threaded Axle with Nuts
Attachment Points:
Rear Rack Bosses, Fender Bosses
Gearing Details:
7
Speed 1x7 Shimano Nexus, Internally Geared HubShifter Details:
Shimano Nexus Grip Twist
Cranks:
8Fun Alloy, 170 mm Lenght
Pedals:
Wellgo LU-C25 Cage
Headset:
Straight 1-1/8"
Stem:
Folding, Telescoping
Handlebar:
Alloy, Flat, 22.5"
Brake Details:
Front: Clarks Mechanical Disc with 160 mm Rotor, Rear: Shimano Inter-M Roller Brake, Bafang Levers with Motor Inhibitors
Grips:
Flat Rubber
Saddle:
Comfort with Bumpers
Seat Post:
Aluminum Alloy
Seat Post Length:
500 mm
Seat Post Diameter:
31.8 mm
Rims:
SR Rain Bow DA-20, Double Wall, 36 Hole
Spokes:
Stainless Steel, 13 Gauge, Silver with Nipples
Tire Brand:
CST City, 20" x 1.75"
Wheel Sizes:
20 in (50.8cm)Tire Details:
Reflective Sidewall Stripe, 35 to 45 PSI
Tube Details:
Schrader Valve
Accessories:
Steel Fenders with Rubber Mud Flaps, Steel Rear Rack, Integrated Blaze-Lite HL1900, Stand Alone Blaze-Lite Rear Light (Seat Post Mounted)
Other:
Locking Removable Battery Pack, 300 lb Max Rider Weight
John George Cunningham
8 years agoNice to see women in this industry. She was very smart to install a low powered mid drive with an IGH…now if it only had a belt…..!
ReplyGreat job Christine!
Court Rye
8 years agoThanks for your feedback John! I’m sure she will read through these comments at some point and maybe there will be a belt option with the next one :)
ReplyJohn George Cunningham
8 years agoI think there is some issue with bafang and the belt drive hence no belt option…..not sure of this.
I always enjoy your reviews!..Keep it up your doing great work…and I hope your doing well.
Does she have these bike ready to purchase or is this one of these promotions where maybe you can purchase in 12 months or so?
I see lots of these kickstarter funder projects that I have waited for more than a year after funding and some never even ship…I am pretty much done with those projects at this point…but I dont think that is the case here…but wanted to ask.
ReplyCourt Rye
8 years agoHey John, I was just thinking that to myself… Wishing I had clarified why Cristine did not do a crowd-funding project. I believe she does have these for sale now. What we saw was a finished product, much more polished than some of the Kickstarter and Indiegogo ebikes I’ve seen at times :)
ReplyCristine Wiseman
8 years agoHi John! Apologies for the tardy response. I just returned from a business trip. You are absolutely correct in regards to the belt drive and Bafang motor. My initial plan was to use a belt, but Bafang is unable to use one. There are, of course, pro’s and con’s to both chains and belts, so I figured I would use a chain now and see if it could be changed to a belt later. Another way more expensive bike is out there that has a mid drive and belt, but no internal gears. I personally think that having an internal hub was more important for the functionality of a folding bike.
These bikes are in stock and ready to ship. I opted not to do a crowd funding campaign because since this was our first bike build, I did not want to promise to deliver by a certain date and not be able to do it. Considering that we anticipated receiving product by December and received them by February (which was only delayed due to a minor hick-up), we now have a good understanding of time frames. Another thing to note is that running those types of campaigns often is beneficial for marketing, but can end up costing a lot of money in the long run since most campaigns sell the product at lower than the actual manufacturing cost to gain traction. Since we already had industry knowledge and the funding to move forward with the initial production, we chose to dive right in. Having said that, we offer a 6 month 0% APR option, and we are running a launch sale. Feel free to email me directly at cristine@platinumebikes.com for more details :)
Thanks so much for your input, John! Happily and Sincerely, Cristine (the e-bike queen :)
Replyfourdog
8 years agoThanks for the review, looks like a really well thought out design. I spoke to Cristine and it looks like she has bikes in country ready to ship. Love the Bafang mid-drive motor and hiding battery. I liked it so much I ordered one today . Will post what I think when I get it. Myself I would rather buy from someone that puts there own sweat in the game and brings an item to market . Then someone that has an idea and looks to other to fund it. I love her passion for that bicycle !
ReplyCourt Rye
8 years agoThat’s awesome, thank you so much for sharing your updates and volunteering to report back once the bike arrives and gets you going. I really appreciate it and I’m sure others do as well. I agree too, that it’s inspiring to see someone invest in something they believe in and have it ready right when you’re ready to buy vs. making you weight and possibly suffer through changes you might not have expected or wanted. I like crowd funding but don’t love it when the theme is “bulk-buy” on something that’s really being invented you know?
ReplyCristine
8 years agoHi Court, thanks for the kind words and for taking the time to create this review… in the rain! Being self-funded is hard (and let’s admit…down right scary!) but manufacturing takes a substantial amount of time and what can go wrong will go wrong, which is why most crowd funding campaigns do not usually deliver when they say they will. We started designing our product around March 2016, and factory after factory told us they could not make our product because they were unable to make it according to our very specific design specifications, we found one that could. However, even they were unable to get certain parts that we wanted, so we really had to think outside the box to get our product where we wanted it to be. That’s what it takes to deliver something entirely NEW!
Happily and Sincerely, Cristine (the e-bike queen:)
Dan Murphy
7 years agoWe have 2 of the Platinum E-bikes and have been riding them for several months. I returned to this review to refresh myself on the specs of the e-bike itself and to see any updates. We travel in a motorhome and these bikes have been very easy to transport and use wherever we go. I love the mid-drive and internal hub. I don’t have to worry about any derailler. We can take the bikes in the cargo area or we can load both in our car very easily.
Our e-bikes have garnered attention wherever we ride and we have really enjoyed riding them for miles and miles. We have ridden as much as 27 miles once in Madison Wisconsin. and still had battery charge remaining! We ride around our RV park and surrounding trails for days without a recharge. People ask us how far we can ride and I really don’t know what to say so I give the stock answer found in this review. One of these days I may ride till it quits to find out!!
We have had an issue with the speed control sensor and Error 21 but Cristine has been very helpful and we believe we have the problem solved. Better education on how the bikes operate would eliminate many user issues. Cristine sent some pictures and gave advice and was very pro-active. So far we are very happy with the bikes and the service and support from the company has been fantastic! I recommend the 3ond Platinum E-bike but suggest riding several makes and models to find the right fit.
ReplyCourt Rye
7 years agoWhat a wonderful testimonial Dan! I’m so glad you’ve enjoyed this bike and happy to hear that Cristine has been supportive with your error issue. It sounds like your friends are getting curious about ebikes too! Fun :D
ReplyDan
6 years agoIn , it shows him struggling to get up a long incline due to the hesitation of the bike to shift gears without him pausing. He makes this seem like a pretty severe problem arguing that the nature of the internal gears and mid-drive engine make it a lot more difficult to choose gears than would be the case with a rear hub ebike. It didn’t seem like your test ride was on anything other than flat land. Do you have any thoughts about this critique. I also wonder whether the 350 watts in the BBS01 is a bit underpowered these days, with so many engines between 48v and 500 watts. Would it be worth it to buy a 350 watt ebike like this with a 36v/14ah battery versus a 500 watt ebike with a 48v/13 ah like the Green Bike GB500 (please review this one!). Would range be better in the 48v/13 ah bike?
ReplyCourt
6 years agoHi Dan! I watched the video and saw Turbo Bob talking about the internally geared hub while climbing around 3:35. Yeah, if you’re riding with a mid-motor and it’s putting out constant power, shifting is not going to happen. This is a self protection feature on IGH system, and you can hear some of them make a clicking noise until the gear shifts. With some cassettes, you can shift gears, but it may bend the teeth on your sprocket, de-tune the derailleur, or even break the chain if you force it. I don’t see a big problem with the 3OND setup, or other mid-drive ebikes with efficient motors. Most of the big guys like Bosch, Brose, Yamaha, and Shimano are using motors that offer similar or less than 350 watts peak, and they work beautifully in off-road mountain biking conditions. I think this is more of a ride style thing, and maybe Turbo Bob just looking for an area to critique. To really do this point justice, I’ll make a clear statement: mid-drive motors can be very efficient for climbing, but you must shift before the ascent. If you try to shift during a climb, you will have to coast for a moment (gently pedaling forward to guide into the next gear) and this will lower your speed and could create balance issues. If you try to force it, IGH systems may not shift and traditional cassettes may take damage. A hub motor, by contrast, will give you a constant flow of power regardless of your pedaling gear, but will struggle with steep hills because that constant power output cannot benefit from the gears you have chosen. If you shift thoughtfully, mid-drives will be the winner every time for both efficiency and power. The more advanced mid-motors can start and stop faster, so shifting can be done more quickly and naturally vs. a cadence sensing BBS01 or BBS02 which are slower to respond. You can use the motor inhibiting brake levers to manually cut them to shift quickly, but this requires a bit of timing and coordination skill :)
ReplyDakota
6 years agoHi Cristine! I love all of the thought you put into this bike. I especially love the mid-drive motor, front suspension fork, hidden battery, kickstand and rear hub internal gears. There is so much packed into this folding E-bike! I am looking for a folding E-bike that can handle my city surrounded by hills. I read that the mid-drive motors are the best kind of motors for this purpose. I am wondering if you will be designing any folding E-bikes like this with fat tires too?
Dakota
ReplyPS: this summary and review page is really helpful.
Court
6 years agoGreat comments Dakota! I haven’t been in contact with Christine for a while and cannot say whether she is still selling this model or in the business. There are lots of great new options in folding fat bikes, like the RadMini… and now they make it in a step-thru model too, so it’s easier to mount and handle. As far as mid-drive folding models, I think Tern is one of the best brands to explore, but they only have regular tires on their ebikes right now. Thanks again for sharing your thoughts and support of Christine!
ReplyMike
3 years agoHow to order I’m from the Philippines?
ReplyCourt
3 years agoHi Mike! I have no idea, wish I could be of more use to you with this question. Perhaps you can ask around online or find a freight forwarder or local electric bikes to buy?
Reply