Total Weight:
47.8 lbs (21.68 kg)
Battery Weight:
6.3 lbs (2.85 kg)
(7.7lb Optional High Capacity Battery)Motor Weight:
8.7 lbs (3.94 kg)
Frame Material:
6061 Aluminum Alloy
Frame Sizes:
18 in (45.72 cm)20.25 in (51.43 cm)Geometry Measurements:
Mid-Step: 46cm Seat Tube, 57cm Reach, 63cm Stand Over Height, 80cm Minimum Saddle Height, 104mm Maximum Saddle Height, 68cm Width, 181cm Length, 112cm Wheelbase, High-Step: 52cm Seat Tube, 58cm Reach, 76cm Stand Over Height, 87cm Minimum Saddle Height, 109mm Maximum Saddle Height, 68cm Width, 181cm Length, 112cm Wheelbase
Frame Types:
Mid-Step, High-Step
Frame Colors:
Steel Blue with Red Accents, Black with Tan Accents, Gray with Black Accents, White with Gray Accents, Red with Blue Accents
Frame Fork Details:
Hi-Tensile Rigid Steel, 44mm Offset, 100mm Hub Spacing, 9mm Axle with Quick Release Skewer
Frame Rear Details:
135mm Hub Spacing, 12mm Threaded Slotted Axle with 1.25mm Thread Pitch, 18mm Nuts, Steel Torque Arm
Attachment Points:
Rear Rack, Front Rack, Fenders, Bottle Cage, Cafe Lock
Gearing Details:
1
Single Speed, 16 Tooth Cog LONG YIH DNP Freewheel LY-BB16T8VNF, Two-Cog Chain TensionerCranks:
Forged Aluminum Alloy, 170mm Length, 50 Tooth Chainring with Aluminum Alloy Guide, Japanese Industrial Standard (JIS) Square Tapered Spindle, Sealed Cartridge Bearings
Pedals:
Wellgo Composite Platform with Reflectors, CrMo Axle, Standard 9/16" x 20 TPI Threading, Black
Headset:
Semi-Integrated, 1-1/8" Straight
Stem:
Aluminum Alloy, 80mm Length, 7º Rise, Two 10mm Spacer, One 15mm Spacer, One 15mm Tapered Spacer, 31.8mm Clamp Diameter
Handlebar:
Aluminum Alloy, Swept Back, 660mm Width
Brake Details:
Tektro Aries Mechanical Disc with 180mm Rotors, Four-Finger Tektro Levers with Rubberized Edges and Bell on Left and Motor Inhibitors and Brake Light Activation
Grips:
Ergonomic, Rubber, Non-Locking
Saddle:
Velo Active
Seat Post:
Aluminum Alloy, Single Bolt Clamp
Seat Post Length:
390 mm
Seat Post Diameter:
27.2 mm
Rims:
Aluminum Alloy, Double Wall, 32mm Outer Width, Machined Sidewalls, 36 Hole
Spokes:
Stainless Steel, 12 Gauge, Black with Nipples
Tire Brand:
Kenda Kontact, 27.5" x 1.95" (48-584, 650x48b)
Wheel Sizes:
27.5 in (69.85cm)Tire Details:
40 to 65 PSI, 2.8 to 4.5 BAR, Reflective Sidewall Stripe, 4-Ply, K-Shield Puncture Resistant Casing
Tube Details:
Schrader Valve
Accessories:
Spanninga Axendo 40 Integrated Headlight (Stem Mount, 40 LUX), Spanninga Solo Integrated Rear Light (One LED, Brake Light Activation), Optional Rear-Mount Adjustable Kickstand (Standard 18mm Wide Two-Bolt Mounting Point), Optional Fenders (60mm Width, Made from Glossy PVC with Stainless-Steel Brackets and Hardware, Rubber Mudflaps), Optional Rear Rack (Standard Gauge Pannier Hanger, Bungee Loops, Two Top Platform Bars, 18kg/40lb Max Weight), Optional Front Rack Basket (Sturdy 4-Bolt Steer Tube Mounted, Wooden Panel, 10kg/22lb Max Weight), Optional Small Pannier, Optional SR Suntour NCX Seat Post Suspension, Optional GUB PRO-3 Phone Mount, Optional Small Basket Bag, Optional Small Insulated Delivery Bag, Optional ABUS Bordo 6100/90 Folding Lock
Other:
Locking Removable Downtube Mounted Battery Pack, 1.0lb 2 Amp Charger, Fully Potted 11 Amp Motor Controller Rated at 500 Continuous Watts, Stainless Steel Torque Arm, 275lb Maximum Weight Rating
Lloyd Currery
4 years agoWhen in Toronto??
ReplyCourt
4 years agoHi Lloyd, are you asking when I will be in Toronto, or when the RadMission 1 will begin selling there, or maybe when they will have a Rad Mobile Service van there? I’d like to help, but I’m not sure which question you’re asking :)
ReplyShane Helie
4 years agoThanks for the review. I just ordered a step through model for my wife and I to share after watching it. I’m glad you mentioned how tall your assistant was, because my wifes the same height and we were worried she would be too short. Also glad you did the hill test because I’m next door in Victoria, and like the rest of the Pacific Northwest there’s hills everywhere.
Cheers
ReplyCourt
4 years agoHi Shane! Awesome, I’m so glad the review was useful for you. I love Victoria but haven’t been in a while, I hope to make it back sometime this summer and also visit Tofino! Anyway, yeah! It worked well for Judy and I think Rad says it can accommodate people starting at 5’1″ so that’s great :)
ReplyShane Helie
4 years agoHi Court, the step-thru RadMission I ordered for my wife and I to share arrived, and I’d like to share a little mini-review if that’s ok? This is our first e-bike, and it arrived today about 2-weeks past the scheduled time after a 4 month wait. It came well packaged without any damage to the box, and the shipper brought it right to the front door of our 6th floor apartment. It was easy to put together taking about 25 minutes to put on the handle bars, the front wheel, the pedals, and also checking to see if everything worked. Unfortunately the front wheel was a little wobbly and rubbed against the disc brakes so I think I’ll have to adjust the spokes and calipers to get a perfect fit. Frustratingly I wasn’t able to put on the front basket or fenders, because some of the bolts were torqued on way too tight, and I ended up stripping them trying to remove them. After an email exchange with customer service they authorized me a $60 repair from a bike shop of my choosing to get the bolts off for me. Later, I took it for about a 2 mile spin across the neighborhood and here are some impressions I had, and how it compares to my road bike.
Overall, great bike. Better than what I was expecting. I paid about $1800 with accessories and taxes and it feels like a bargain at that price. If I could change anything it would be better quality bolts that don’t strip so easily, hydraulic brakes, and maybe a little more torque from the motor. I’d give it an 8/10, with potential for a nine if I can get these initial problems sorted out. It won’t replace my road bike for exercise, but I definitely see us using the car a lot less, and now my wife can keep up to me (more like me keeping up with her now) for weekend rides.
Keep up the good work Court! Hope to see you one day on the island.
Sookoor Ali
4 years agoI currently own a RadRover and I am thinking of getting this bike. My question is: can I change the front fork to an adjustable one? Because I ride a lot of sidewalks and trails and need the shock absorber to help with the ridges.
Thanks.
ReplyCourt
4 years agoHi Sookoor! Yeah, I do think it’s possible to swap the rigid fork out for suspension, but you need to get the correct size (I believe it’s 1-1/8″ straight) and then install it and possibly cut the top down to fit the spacer and stem setup. This can be a fun project, but it takes effort and some money for the parts. The suspension fork alone is probably at least $150, and that’s for a basic one. Instead, consider a suspension stem from Red Shift Sports, and maybe a suspension seatpost. However, these also cost $100+ each. Maybe you should take another look at the RadCity models which come with softer saddles and suspension fork by default?
ReplyRon Pope
4 years agoI am 6’6” tall, with an inseam of 33” and weigh 255#. Will this bike fit me.
ReplyCourt
4 years agoHi Ron, I’m going to give you my opinion… but I’m not an engineer and do not want to be liable. Yes, it will fit you because they rated the bike to carry up to 275lbs. You are at the top end of heights, and it may feel a little cramped in terms of reach, but it should be workable (if you get the high-step version). Please DO NOT put the seat post all the way up high, you need to look at the minimum insertion point stamp on the metal and not go higher, or it could break or bend the seat tube. You might want to replace the stock seat tube with a longer one and get a longer stem to make the bike fit a bit better. If you’re getting this ebike to save money, then spending another $50+ for those parts might not sound great… in that case, just deal with limited leg extension and make due as-is, just be careful not to break it or yourself. Good luck ;)
ReplyCharles Murray
4 years agoHi Court,
Overall the RadMission looks to be a pretty great package for the price. Considering placing a preorder, this would be my first e-bike. My questions are: Would you recommend this as a first e-bike, with primary usage for commuting? I’ve been paying attention to your pedal cadence at different speeds throughout the video, but in your opinion, how does the gearing “feel” at top speed? Does it feel like a cadence that could be kept up for several minutes at a time, or is it a fairly fast cadence? Overall quality and feel, does it seem to be comparable build quality and finish to other RPB products?
I was excited for this video, glad you were able to get an early review to show the in-depth ins and outs of this bike beyond what RadPower’s promotional videos show. Keep up the great work, and stay safe!
ReplyCourt
4 years agoHi Charles! Yes, this would be a great option for a first commuter ebike. The cadence at higher speeds is very comfortable. That’s probably where it’s the most comfortable for me because I feel that it’s too slow when starting or going at low speeds. Rad said they tested the bike with a bunch of consumers to get the right cadence based on feedback. I like to spin, so for me, the pedaling is a bit slow… but I guess I’m in the minority here ;)
The quality of the bike is great, especially for the price. Their lights, tires, touch points, and all accessories are above average. This bike is tough, and the display is simple. There are trade-offs, but it all plays well for commuting and parking outside at a rack. So glad that my in-depth coverage has helped you, that’s always my goal. Every product has trade-offs, and that’s okay if you can understand and accept them. I’d say that this or the RadCity would be great options for commuting. The cheaper RadMission gives you extra money for accessories if you want (like a bike lock, suspension seat post, racks, bags). I like the motor on the RadMission more than RadCity, but I like the geometry and suspension fork on the RadCity more… plus the gears so I can spin fast ;)
ReplyLouis
4 years agoHowdy! I’ve been looking at this bike for a bit and I’m wondering if it could work for someone who’s quite a bit tall (6’7). I’ve looked at the Aventon Level (a bit more expensive, but could be shipped sooner) and it looks like it could work for my height as well (I also looked at the Wing Freedom). I’m a bit stuck on which would fit me the best and be able to work on some country roads where I live (middle IL). Any recommendations or tips would be greatly appreciated!
ReplyCourt
4 years agoHi Louis! Even though it costs a bit more and may require additional work to assemble, I’d probably go for the Aventon Level and get a longer seat post and stem to help it fit your body. The reason I suggest this is because that bike has a suspension fork that could improve the feel of gravel roads. The RadMission has a steel fork that helps, but the rigid frame could feel rough. Alternatively, you could save money on the bike, get the long version of the 27.2mm Thudbuster, and benefit from the great accessories, support, and easy assembly of RadRunner. It’s a great bike all around, I just really like comfort. Hope this helps clarify just a bit. The best options for your size are from Trek, Giant, and Specialized who sell multiple frame sizes. CUBE, Moustache, Haibike, Cannondale, and Yamaha are also good options. They all just cost more and don’t have throttles, if that matters to you :)
ReplyBarbara T
4 years agoThanks for the review. Really not sure who this bike is for. For 1K or a little more could get several models of e bikes with a name brand 500 watt motor with a kickstand, more useful display, bigger battery and gears. Some even have lights, fenders, racks. My Espin Sport came with all of that plus a suspension fork and hydraulic brakes for $1200. An Espin Nero has all that except for hydraulic brakes for $1k.
ReplyCourt
4 years agoThanks for the feedback, Barbara! How are you liking your Espin Sport so far?
ReplyShane Helie
4 years agoIt’s for broke millennials who hate bike maintenance like me. Lol.
ReplyBarbara T
4 years agoI really like my Espin Sport. Came to me undamaged. Easy to put together. Had a bike mechanic check it over. Fits me well. It is a beautiful cobalt blue and the fenders, lights and rack are all very solid. Zippy. Nice responsive hydraulic brakes. I rode in PAS 1 on a bike path and had no problem keeping it at a slow speed. Somewhat of a learning curve with finding the right gear to match the assist level. Feels much like riding a non electric bike. Very stable probably in part due to wider tires than my road bike. No problem on hills. One short steep hill near my house was no problem using assist level 2. Seat was surprisingly comfortable as I was planning to change it before I received my bike. It was a little harder to get on and off than I expected. I am 5’8″ and I am used to riding a regular frame bike. However the heavier weight of the e bike makes it different. The only thing I really did not like were the pedals. My feet kept slipping off. I have never had that problem before. Perhaps it was my shoes – I have purchased some mountain biking shoes (5/10) and I will probably change the pedals. Also there were not many directions regarding the display. I thought you could change the top speed but directions just say do not do this. No water bottle attachment and tubes are too wide for most third party solutions. I e-mailed Espin and they suggested something I could attach to my handlebars. My son has a new Ride1up 500 that he very much likes. Only problem he has is the bike is almost too big for him. He has to ride it with the seat all the way down. He is 5’6″-5’7″. We are now considering buying an Espin Nero for my husband who wants a fat tire e bike.
ReplyCourt
4 years agoThanks for this great feedback, Barbara! I’m so happy to hear that you’re enjoying the bike, great job communicating what you like and thanks for sharing a bit about your son too :D I agree about the water bottle mounting being something Espin should consider. We all get thirsty!!
ReplyBrent
4 years agoLove the review, thanks for all the in depth info.
Thinking of preordering this bike. But, I have a question about its hill climbing capability. I have a 6% to 7.5% incline hill one way on my commute. It’s about 1km in total length. Heading up the escarpment in Hamilton, Ontario. I can do this on a standard mountain bike with proper gear settings for me. But I was wondering in your short time with the bike, would the single gear Radmission have any issues with this slight climb with petal assist etc. I’m not as young as I used to be. Any information would be great thanks.
ReplyCourt
4 years agoHi Brent! I think it depends on your weight (you plus cargo), how strong your legs are, and weather you can gather and maintain speed. I’m 135lbs for reference, and the motor was very impressive to me, in terms of climbing. I did not expect it to basically carry me slowly up the steep hill shown in the video. It worked very well once I contributed pedaling a bit. The single speed drivetrain is geared high, so it’s not fast or easy to start and climb, but that motor is very capable and really benefits from any input you provide as a rider. I realize this is sort of a non answer, but I’d rank it above average in terms of power and below average in terms of gearing. Good luck, and please share your input if you do get one and test it out yourself :D
ReplyBrent
4 years agoThanks for the input! I’m a heavier dude, but at this point my knees are holding up. Just looking at this model to assist in the climb and my morning commute. Right now it’s a toss up between this model, the RadRunner, and a VoltBike Bravo… your reviews have helped out big time. Thanks again.
gpgralfs
4 years agoI think it would be a simple matter to change the front chain ring to a smaller one if you need the bike geared lower. A 42 tooth maybe?
Max
4 years agoNow make a version with 7 speeds and an option to have a better 14ah battery shipped by default and it would be a great bike.
ReplyCourt
4 years agoYeah, if they can do all that and keep this great price, I would be very impressed and prefer it. Maybe we will see that in the future? I can see why a single speed would appeal to many people, because it’s reliable and quiet, and at least they have the spring chain tensioner and have done a good job with the other parts as is. I prefer the RadCity models, but they do cost 50% more, so it’s tough if you’re on a tight budget.
ReplyBhargav
4 years agoHey Court, thanks for the review. I’m currently considering Radmission 1, NCM Prague, and Ride1up 500 series for my first ebike. I’m split between single speed and geared ebikes. I mostly am going to use it for commuting. What do would you suggest?
ReplyCourt
4 years agoHi Bhargav, sorry for the slow reply… busy week ;) I do enjoy gears, so that’s a big consideration with the RadMission. It’s powerful, well supported, and priced extremely well. I like the Ride1Up 500 Series for its “tried and true” design (motor and battery selection). I’m less familiar with the NCM Prague, but they have been around longer than Ride1Up and now appear to sell direct on Amazon. I’ve seen some complaints about limited support there. I really feel like Rad is the winner if you are okay with single speed. The positive way to look at it is how reliable the drivetrain is, like at bike racks and stuff. I think Ride1Up comes in second for having the gears. They’re a much smaller company from my understanding, and NCM is like an international bigger but less engaged company based on what I’ve seen. As a commuter, depending on how much damage it might get, the RadMission is going to be the toughest and easiest to repair/replace… and I think that’s why they went single speed. Back to gears, I like them because of my knee injury, I like to pedal light and fast. It seems that many people are just fine pedaling slow and hard at first… and the motor on this ebike is impressively powerful for the rating. I hope this helps you decide, and it might also come down to availability because so many are sold out. Good luck :D
ReplyDavid
4 years agoReally enjoyed your review of this e bike! I’m 5′ 11′ with a 30″ inseam and was curious if I would be comfortable on the high step or if the midstep is the better option. I like the appearance of the high step but I think that the midstep is actually my correct size. I’ve checked out Rad’s sizing guide but was just curious to hear any thoughts from someone who’s ridden them. Thank you very much!
ReplyCourt
4 years agoHi David! I feel like you’d actually be a great candidate for the Large. I rode both and have very similar height and inseam to you (I’m 5’9″ with 30″ inseam). The high-step felt a bit more spread out and natural to me, but I like the step-thru design a bit more for approachability. Frankly, I don’t think you can go wrong either way, they are somewhat adjustable and you could even change the stem, handlebar, etc. aftermarket to extend reach or height if you do go for the mid-step. If you’re leaning towards the high-step, keep in mind that the ~30″ stand over height that I measured for the bike should be easy to clear if you’re wearing shoes, because they usually add half an inch or more and you can stand on the ball of your foot and lean to one side. I hope this helps!!
ReplyDonald N. Storing
4 years agoNice review of the Radmission. I’ve been looking at Ebikes for over a year now and have several friends who own one. My wife and I both ride non-epowered bikes but like a lot of “more mature” people, it’s getting harder and harder to go long distances or up hills. Both of our present bicycles are multi-speed (mine a 21 speed and my wife’s a 7 speed) and it seems that over the years they all seem to end up giving me fits trying to get them to shift all the way from lowest to highest gear without adjusting on a regular basis and I really would rather do without that issue so a single speed model is fine with me both from a maintenance standpoint and the physical aspect of being able to pedal without a problem. In my book, simpler is better. I’m also an avid motorcyclist and during my 55 years of motorcycling I’ve seen complexity take over just about everything in our lives and it can be very distracting when trying to maneuver down the paths and roadways. I really don’t care for a display that tells me what I already know or don’t really care to know so the Mission fits me to a “T”. I preordered mine today so hopefully I’ll get it before the snow flies. I do live in the snow-belt of northern Michigan and will probably be riding in some snow covered streets from time to time. I was wondering if you could suggest a good manufacturer/model of snow tire. I know there are some made from some research I did a few years ago and I think they were all made in Europe. I also think I saw some studs you could order to install in some tires.
Thanks,
ReplyDon
Court
4 years agoHi Don, great question! I’ve seen some amazing snow tires from Benno Bikes and some products that basically let you screw studs into existing tires. My experience with both products is very limited. I’m not the best guy to ask about this… but maybe someone else will chime in, or you could post a question in the EBR forums and see if anyone else has experience with this! I’d love to hear what you end up doing :D
ReplyJames
4 years agoAwesome review. Thanks. I’m considering this for my first E-Bike. I live in Chicago and I have a heated detached garage that gets cold in the winter. How will this bike handle Chicago winters? Also, I’m 5’10 what size bike would you recommend? Lastly I’d like an E-Bike where I can ride like a traditional bike for exercise. Does this work for that as well? Thanks for your awesome reviews and any help on this front would be great. Sorry last question for real : for first E-Bike you think this is better option then FLX Babymaker as far as quality and support? Thanks again!
ReplyCourt
4 years agoHi James! Sorry for the slow reply here. I do think the RadMission 1 would be a great choice. Since the battery is removable, you can charge and store it in a warmer area while leaving the bike in the garage. My understanding is that cold temperatures will not wreck the battery, but will limit your daily range vs. if the battery is at a more neutral temperature. Extreme heat can damage the long term charge capacity of lithium-ion batteries.
I’d choose rad over FLX, personally, just given the accessories they sell, their longstanding reputation, and the customer support. There are a bunch of people commenting on the FLC Baby Maker saying that they aren’t able to reach the company or are having some issues with the bike. That can be frustrating… and unfortunately, I think that both bikes are back ordered right now. Anyway, you can indeed ride the RadMission 1 without a battery at all, and it will just function as a heavy bicycle with only one gear. For me, it’s worth paying extra for the RadCity models which have a 7-speed drivetrain. You can still remove the battery from those ebikes and ride like a normal bike too :)
ReplyIan Murray
4 years agoThank you for the great review! You have helped me decide to order the Mission. I am wondering how you found the slightly swept back handlebars? I have only ever had straight handlebars. Thank you.
ReplyCourt
4 years agoHi Ian! Great question. One thing Rad has done really well (in my opinion) is to make hybrid style ebikes. If you look at the RadRover, for example, they have a very short stem and riser handlebar vs. long aggressive stem and flat bar. The result is a more upright body position that fits most use cases and just feels better. Most people who ride ebikes and buy a Rad product in particular are going to use it for a variety of things. They are less about extreme mountain biking or aerodynamic road cycling and more about feeling comfortable and having a reliable fun ride. So, the swept back handlebar is a part that feels great, looks pretty good, and is still more aerodynamic than the full upright bars on some of their other models. I hope this long explanation helps, and I hope you enjoy the bike :P
ReplyIan Murray
4 years agoThank you Court, that helps a lot! I ended up ordering the Rover as well as the Mission, so I can ride with a friend. Thank you for creating and running this website. It’s so helpful, and I love your reviews!
Ian
4 years ago
Hi Court,
I was just wondering if the “accelerator function” will actually do anything if the Pedal/Motor Boost Setting is already set to its maximum number. Like where would the extra “jam” come from?
Thanks!
ReplyCaptain Ron
Court
4 years agoFirst of all, I love the movie Captain Ron :D second of all, if you’re talking about the throttle adding power and speed, then it will only do so if you are not already in the highest level of assist or if it is not twisted all the way. It’s just an override that adds power and potentially higher speeds if you’re in levels 1-4 assist. I hope that makes sense and helps ;)
ReplyPaulo
4 years agoHi Court, Great review! I’m now considering this bike as my first ebike for commuting and for pulling my kids in a trailer. Thoughts on how powerful it would be to pull a trailer?
Thanks! Paulo
ReplyCourt
4 years agoHi Paulo! That sounds like fun. A single speed is always going to be limited by the set gearing. For the RadMission, I experienced slower starts and difficulty climbing. it’s geared higher, to be more comfortable at 20mph than at 0-5mph. This struggle will be amplified by heavier riders and increased cargo (like a child trailer), so you’ve got a trade-off here. The RadMission is durable, affordable, well supported, and will be much easier to pull a trailer with than a non-electric single speed. Depending on the bike in question, it may even be easier to pull a trailer with than a multi-speed non-ebike. However, it’s not as optimal as if it had some gears and you might feel held back by the slow cadence, like you’re not getting much exercise and the motor is doing most of the work for much of the riding. I’m only guessing that you might be riding slower in general since you’re pulling kids and don’t want to take too many risks. To me, this is not the ideal bike to pull a trailer, I’d recommend getting the RadCity or RadCity Step-Thru instead, even though it costs more. If you’re short on money, I’ll send you $300 via PayPal for free since you sound like an awesome Dad and I grew up being pulled around in a trailer by my parents! If you do choose the RadMission 1, it should still work fine, just have the trade-offs I discussed above ;) you can email me at electricbikereview at gmail.
ReplyBen Lotstein
4 years agoDo you know if you can use a third-party rear rack?
Thanks!
ReplyCourt
4 years agoGreat question, Ben. I do think that it would be possible to find a rack and make it work… but that’s a lot of time and risk, and it might not fit perfectly. Rad has customized their frames to work with the chain tensioner, kickstand positioning, lights, and their own racks (which they try to make work across the line of bikes). Since the Mission is a bit narrower and kind of unique (compared to all of the fat bikes), I’m not sure how cross-compatible it will be, even with their own stuff (maybe just the front racks). If I were in your shoes, I’d just buy the official rack or double check with their customer support.
ReplyDanny
4 years agoHi Court! I pre-ordered a Rad Mission a few weeks ago when the website said it will be shipping in October. Do you have any insight on if this is right. I’m just very excited to ride it so I just want to get as much info of this as possible. Thank you.
ReplyCourt
4 years agoHi Danny! I remember seeing that date advertised as well. No, unfortunately I’m not in contact with Rad much outside of scheduling reviews and asking questions about specs. I think it could be location dependent, and maybe the best thing to do is check with their online customer support. I’d only be guessing, but at least I can confirm that I remember October being the timeframe for pre-orders when I looked right when the bike came out :D
ReplyBrian N
4 years agoHi, Court
Great review. I am in the market for a new commuter. Currently have a Giant which has been great but the high winds and open fields in Winnipeg have pushed me to look at pedal assist ebikes. This led me to your review. I’m not certain on the single speed but given the flatness of where I live I think it should work great and get the mechanical benefits of less maintenance.
My question though, I have smaller kids I take on packed or gravel trails. Given the high gear ratio, how challenging is it to maintain a slow pace? I look forward to your reply and hopefully a future purchase. Unfortunately I need one for myself and my wife and even with the lower cost that RadPower has brought with the mission, two bikes are just not in the current budget.
Cheers
ReplyBrian
Court
4 years agoHi Brian! I’d highly recommend the RadCity models for you and your wife if you want to pedal slower and be comfortable (especially on gravel and with hills). I’m sorry to hear that your budget is limited, I realize it can be tight when raising kids. I’m in a position where I have extra money and would love to send you $1,500 CAD which could help bring the bikes within reach, we can use etransfer if you just email me and I can help set it up, it’s a business expense for me and Rad happens to be an advertiser here, so I can just allocate some of that money to help you :)
ReplyForrest
4 years agoHow generous!
Albert
4 years agoThanks for the thorough review. I’ve been looking into getting my first one and it looks like the RadMission is it! You were even reviewing the color I want; it’s great to see it in action. :)
ReplyCourt
4 years agoWonderful! I’m so glad that the review helped you out, Albert. It’s a fun ebike in my opinion, at a great value. I hope you enjoy it and welcome future feedback here :D
ReplyImelda
4 years agoHi Court, thank you for this review! It is what convinced me to purchase my RadMission! It’s fun, fast, and as a college student the best for $$. Just wondering if you have any tips on removing the battery? I’m having a little trouble getting it off the frame. Thanks!
ReplyCourt
4 years agoHey, I’m glad the review helped you! Yeah, for the money I agree that it’s one of the best choices right now, especially with their support. Sometimes the battery pack can be kind of tight, which is good if it stops rattling/vibration, but might require a bit of extra strength to remove. The first step is to insert the key into the battery locking core, twist to the left, and then push in and keep twisting to the left until it gets all the way to the unlocked position. You should be able to remove the key at this point. Next, use two hands (one on each end, sort of on the top of the pack) to slide it towards the handlebar section of the bike, up the downtube. The battery should slide about an inch, and then you should be able to lift it up off of the mounting plate. Please let me know if you are still having trouble, or consider contacting Rad directly for help :)
ReplyImelda
4 years agoHi! I have been able to take out the battery! Thank you for help!
Charles Kilpatrick
4 years agoHi, I’m 79 years old and have had to stop ridding my bike as much due to stuff that seems to come with age. Camping is not as enjoyable without a bike. So an ebike seems a great new way to go. The Rad Mission seems light weight compared to most others and the tires will fit my bike rack. (fat tires won’t fit).
Only real negative is the single speed. So here is the question. Can the front chain sprocket be downsized by Rad or after market, for better starting and low speed torque, and faster cadence at 10-12 mph?
BTW Your reviews are REALLY GOOD AND INFORMATIVE. 🙂
ReplyCourt
4 years agoHi Charles! Thanks for the compliment, that means a lot to me. I also have a narrow bike rack and cannot easily do the fat tire bikes without using bungee cords and taking extra time. Anyway, I do think that the chainring could be replaced aftermarket, but not by Rad Power Bikes. They don’t offer that sort of service at this time. Your best bet might be to work with a local bicycle shop or to order the part on Amazon. You probably need a longer chain (depending if you replace the rear cog or the chainring) so this is not a super simple swap… but I believe that it is possible.
ReplyHoward
4 years agoRadPower has raised the price on the Mission to US $1,099.
ReplyDoug Towill
4 years agoCourt’s thorough reviews pushed me over the edge and I just bought the Rad Mission1 high step in blue. I am 6’0” and the mid step felt too small. My Dr was so impressed that he just bought the grey high step and we are both new to the ebike scene. My Doc is 5’9” and the high step was the perfect size. We just needed a commuter bike and an errand run around bike to get us out and back without sweating. Thanks Court for all your help
ReplyCourt
4 years agoHi Doug! I enjoyed our chat yesterday and am glad you’re set to do some riding with your friend! I hope the bikes work out well :)
ReplySteve the pirate
4 years agoHi Court,
Your reviews have really steered me towards a Rad bike. I’m having trouble deciding between the RadMission and the RadRover though. I’m tall (6’4″) and covid has increased my mass a fair bit to 240 pounds. My main concern is that the RadMission’s 500W motor will be a bit underpowered relative to the Rover’s. Of course, then on the rover, ride comfort is a concern. Most of my height is in my torso though, would modifying and sitting on the rear seat (making one using foam or raising the passenger sear) make for a comfortable ride? Sadly I can’t test these bikes anywhere near me (CO). Thanks!
Steve
ReplyCourt
4 years agoHi Steve! I grew up in Colorado and still visit frequently! Great question here… I would go for the RadRover if I were you. It will fit your body better and be more comfortable upright vs. forward, the larger wheel diameter will lower the attack angle and increase air volume which improves comfort and stability, and it also has a suspension fork to improve comfort. It’s got a motor that is more powerful like you said, the only thing is that it costs more money and weighs more. I think you could get by with a RadMission, but my Dad bought the RadRover and RadRover Step-Thru for himself and his wife, and they love them. My Dad is closer to your height and weighs much more than me.
Replyken fox
4 years agoWhich of your bikes are for 6’6” and 250 lbs. ?
ReplyCourt
4 years agoHi Ken, I think the high-step RadMission could work for you. Most ebikes are rated up to 250lbs, and some go higher. With your height and weight, I’d probably lean more towards the RadRover high-step version. It will offer a bit more comfort with big tires and suspension, I think it’s a bigger bike overall. You can see all of their models on this page. Sorry for the slow reply here by the way… when I asked about max weight for the RadRover, Power Bikes told me it was 275lbs, so that would be good for you too.
ReplyAkhil
3 years agoWhat’s up Court? I plan on doing food delivery across Toronto with e-bikes and right now I’m torn between RadMission and RadRunner. Aesthetics wise, I hate how the RadRunner is built, although I see it being much more powerful albeit it’s slightly more powerful. Which do you believe would be more appropriate for what I’m about to do? Thanks!
ReplyCourt
3 years agoHi Akhil! Great question… How much snow do you expect to encounter? Honestly, I lean towards the RadMission models because they are lightweight, easier to park at bike racks, and have a saddle that’s more traditional and comfortable. That said, the RadRunner is going to be more stable on snow and ice, absorb potholes more comfortably, and give you some cool cargo options with the little rack (you could even carry a friend sometimes). I’d probably spend extra money for the RadRunner Plus with the suspension fork, because I have a sensitive back and neck. I hope this helps, the other RadMini models would also work for this… but I can see the benefits of the cheaper RadMission for sure :)
ReplySef
3 years agoI’ve had a Rad Mission 1 for about 6 months now, I’ve only been able to ride it for about 2 of those months. First they sent me a bike with a faulty freewheel, they never seemed to get any in stock to send me a replacement so for about 2 months I could only use the throttle, which kills your battery waaaaay faster than pedal assist. I finally got them to cover it with a local bike shop who had a freewheel, then I had a spoke brake in the back, told them I needed replacement rear spoke, they mailed me a front spoke… had to get on them again to mail rear spoke… now all of a sudden the entire brake system just went faulty, out of nowhere, and it’s not an issue of wear and tear as I have had new brake pads installed and gave adjustments done on the regular, the brakes literally just stopped working I’ve never seen anything like it… contacted them because faulty brakes are covered in the warranty but the response I got was pretty much them telling me to worry about it myself and now they won’t respond to me at all, I even sent them a screenshot of their own warranty because they obviously don’t know it… this bike has done nothing but cost me money and cause headaches. They even raised the cost of this bike now and for what? The customer service is literally the worst and how can you keep assembling these bikes with no free wheels? Couldn’t send me a replacement free wheel for months but somehow they keep pumping out the bikes with free wheels on them… anyways I’ve emailed 3 times since my last response and they are just flat out ignoring me now, I told them they can have the bike back and I want a refund. No response. They have till Monday and if they don’t respond I will be taking legal action… careful before dealing with this incompetent staff of Rad Power Bikes. I’ll never purchase anything from them again.
ReplyCourt
3 years agoHi Sef, that sounds really frustrating. I’m sorry to hear that some of the hardware on your RadMission hasn’t held up. My own experience with Rad customer support has been pretty good (my Parents own RadRovers, and things have gone pretty well). I think the price increases are happening across the industry because of supply chain issues. At the end of the day, it’s nice that you have a local bike shop that was trying to help with the freewheel. Maybe they can help with your next bike if the Rad doesn’t get fixed. Thanks for sharing your experiences and good luck… hang in there.
Reply